© 2012 ATEÏSDIVA systemUser ManualVersion 1.0.0ATEÏS Europe BV - Sydneystraat 42 - 3047BP ROTTERDAM - NETHERLANDSPhone +31 (0)10 2088690 - Fax +31 (0)
DIVA system10© 2012 ATEÏS2 Safety DeclartionDo not expose the device to extreme temperatures, direct sunlight, humidity, or dust, which couldcau
DIVA system100© 2012 ATEÏSThe Key page is where you will define keys for the PSS and their associated action. Depending on thePSS model, you can speci
Product Features 101© 2012 ATEÏSSimply tick the zone corresponding to your needs and click OK.o Route:The Route key act like the one on the front pane
DIVA system102© 2012 ATEÏSevent started by a Event Start key need a Event stop key.When creating an Event Start/Stop key, you will have to select in t
Product Features 103© 2012 ATEÏSControl Keys:CHIME: if the PSS has been set to use a pre-chime and/or post chime, one have to press thiskey to star
DIVA system104© 2012 ATEÏSIn order to access the configuration page, please follow the next steps:Click on the CONFIG keyEnter the configuration acces
Product Features 105© 2012 ATEÏSRETURN: exit the configuration page.PSS G2 V014: displays the firmware version of the PSSG2, CD-TOUCH.SAVE CONFIG: onc
DIVA system106© 2012 ATEÏSsetting is displayed in dB between the two gain adjustment keys, see picture below.The noise gate threshold setting is handy
Product Features 107© 2012 ATEÏSIncreasing the threshold will reduce the speaking distance but will help to avoid feedback as wellas background noise
DIVA system108© 2012 ATEÏSDecreasing the threshold will make the microphone more sensible to feedback and will increasespeaking distance.4.2.3.5.4
Product Features 109© 2012 ATEÏSThis will end the calibration process. The main configuration page will be automatically displayed.4.2.3.5.5 Mechanic
Safety Declartion 11© 2012 ATEÏSTo prevent the unit from falling down and causing personal injury and/or property damage, avoidinstalling or mounting
DIVA system110© 2012 ATEÏSPress the TALK key (Close fist microphone contact for CD-16)The TALK key will be red highlighted to indicate that the call i
Product Features 111© 2012 ATEÏSo In Press To Talk Mode: release your finger from the CHIME key. (CD-Touch: release thecontact)o In Lock To Talk Mode
DIVA system112© 2012 ATEÏSo Press the START key.o The message is now broadcasted in the selected zone(s).o To stop the message broadcasting, press on
Product Features 113© 2012 ATEÏS4.2.4 PSSG2-E4.2.4.1 OverviewThe PSSG2-E TCP/IP Touch paging microphone console is a man-machine interface which allo
DIVA system114© 2012 ATEÏS168 Touch fields: 14 pages with 12 keys , for PSSG2, PSSG2-E.16 Touch fields for PSSG2, PSSG2-E.Jack audio input/Output.Tele
Product Features 115© 2012 ATEÏS Middle Button:No function for the moment. Right Button:Press and hold it for a while to calibrate touch screen. Monit
DIVA system116© 2012 ATEÏS4.2.4.4 ConfigurationIn order to use and configure the PSSG2-E, one has to create the TCP/IP link between the DIVA and thePS
Product Features 117© 2012 ATEÏSAs for any TCP/IP based product, one have to search for it on the network. To do so, go in themenu: Tools -> Devic
DIVA system118© 2012 ATEÏSWhen the Ethernet PSS has been found, return to the "Ethernet PSS management" window, seebelow.With the "Seri
Product Features 119© 2012 ATEÏSThe unit comprises of 16 zones / 16 buttons with fist firemen’s microphone in a metal surface mountwall-box. It p
DIVA system12© 2012 ATEÏSVoice Amplifiero Connect the "AIN+", "AIN-" and " from the "VOICE AMP" connect
DIVA system120© 2012 ATEÏSLinkingThe CD-16,CD-8 uses RS485 protocol over shielded CAT5 to transport data from the microphone tothe VACIE.The theoreti
Product Features 121© 2012 ATEÏS General Status LED:POWER LED: Indicates the power status of the CD-16,CD-8.FAULT LED: Indicates the presence of a fau
DIVA system122© 2012 ATEÏS4.2.5.3 CharacteristicsCaseDimension = 350mm (W) x 250mm (H) x 130mm (D).Weight = 4.7Kg.Color = RAL7035.PowerItemVoltageCurr
Product Features 123© 2012 ATEÏSConfigurable key status LEDAs briefly introduced before, the key configuration of the CD-16,CD-8 depends on the VACIE
DIVA system124© 2012 ATEÏSVerify that the CD-16,CD-8 microphone console is activated in the VACIE software configuration.Verify the CAT5 cable conditi
Product Features 125© 2012 ATEÏSSPA 2060SPA 2120SPA 2240The SPA amplifiers were specifically developed to meet the requirements of EN 6084
DIVA system126© 2012 ATEÏSA surveillance circuit continuously monitors the temperature and the presence of AC and DC powersupplies for both am
Product Features 127© 2012 ATEÏS4.3.1.2 Front Panel VU Meter:The VU-meter is composed of three LEDs that represent three different level thresholds
DIVA system128© 2012 ATEÏS4.3.1.3 Rear panel DC Fuse Receptacles:Two DC fuse receptacles are located on the left of the amplifier’s rear panel. To acc
Product Features 129© 2012 ATEÏSFor each amplifier channel, there is a dedicated Audio Output connector for connection of either 8Ohm speakers, 75V sp
Quick Start 13© 2012 ATEÏSFigure 3-1: Slave add buttonFigure 3-2: Slave list window
DIVA system130© 2012 ATEÏSInput impedance = 20 KOhmsCurrent consumptionCurrent consumption with 28 VDC supply (per channel)Standby1/8NominalPower(Audi
System Functionality 131© 2012 ATEÏS5.1 DIVA Software5.1.1 OverviewThis DIVA software is only for use with the DIVA system.It allows user to real-time
DIVA system132© 2012 ATEÏSIt could happen that the software on the CD-Rom is not the last release. In that case, please visit ATEÏSwebsite to downlo
System Functionality 133© 2012 ATEÏS5. Choose an installation folder, by default, it will be install in C:\Program Files6. Then launch the installatio
DIVA system134© 2012 ATEÏS7. To finish the Installation process, just click "Finish".The installation process will automatically create a De
System Functionality 135© 2012 ATEÏSUninstallTo uninstall a current version of the DIVA software, please follow the next few steps:Click on "star
DIVA system136© 2012 ATEÏS Title Bar:The title bar displays 'DIVA', 'Untitled' if you start a new system design, or the full path
System Functionality 137© 2012 ATEÏS Toolbars:Toolbar items act like a shortcut to their corresponding menu command. Tab Bar:Shows the window title of
DIVA system138© 2012 ATEÏS5.1.6 EditHere you will find all the common basic edition tools of windows based software.Undo / ctrl+z: Will undo the last
System Functionality 139© 2012 ATEÏSControl Section.System Status: Open the system sub-window where all the related logfile action can be found,see P
DIVA system14© 2012 ATEÏSSoftware Start Up First of all, please install the DIVA which could be found on the Ateis-International website. After doubl
DIVA system140© 2012 ATEÏSUser Management: Calls the 'User Management' window to set up users or user groups andtheir individual privile
System Functionality 141© 2012 ATEÏSAudio Enable: Enables DIVA's audio processing.Audio Disable: Disables DIVA's audio processing.Stop All
DIVA system142© 2012 ATEÏS5.1.12 WindowThis menu provides window arrangement commands, and quick access to open design or componentcontrol windowsCa
System Functionality 143© 2012 ATEÏSOpen: Opens existing project.Save: Saves current project.Print: Opens the print preview window. See "How t
DIVA system144© 2012 ATEÏSDisconnect: Disconnects DIVA software from the machine(s).Audio Enable: Enables DIVA's audio processing.Audio Disable
System Functionality 145© 2012 ATEÏSDIVA System: In the DIVA System folder, you will find DIVA Master unit icon.Audio source: In Audio Source folder
DIVA system146© 2012 ATEÏS5.1.18 Design View AreaIn this area, you will:Develop your DIVA configuration and DIVA master network (see How to perform a
System Functionality 147© 2012 ATEÏSLED Display: offers real time status LED display, only if connected to DIVA units. It is a replicateof the front
DIVA system148© 2012 ATEÏS5.2 How To5.2.1 Save/OpenThe Save/Open procedure is quite identical to most of the Microsoft Windows based software. The ico
System Functionality 149© 2012 ATEÏSSave As:The 'Save As' option can be used to save a configuration under a different name.Simply go to the
Quick Start 15© 2012 ATEÏSFigure 5: DIVA Software front page The start page is represented on Figure 5. A first thing to do is to start a new project
DIVA system150© 2012 ATEÏSOnce the new project is launched, you will need to set up the network options as well as the correctIP address, see How To C
System Functionality 151© 2012 ATEÏSThe print toolbar include:Print Button: in order to send the print request.Print Setting Button: in order to set y
DIVA system152© 2012 ATEÏSAfter the devices have been connected and in order to know if your network is well configured, go to the"Device Search&
System Functionality 153© 2012 ATEÏSo Order: Display the order of the slave from a DIVA configuration point of view (independantfrom ID setting).o
DIVA system154© 2012 ATEÏS5.2.5 Set Speaker Parameters SettingThe speaker parameters setting allow to route to the PSS internal speaker an
System Functionality 155© 2012 ATEÏSMusic 1 Enable: By ticking this option, the music source 1 will be routed either on the DIVAmonitoring speaker
DIVA system156© 2012 ATEÏSTo activate or deactivate the DC monitoring, simply tick or untick the corresponding device DCcheckbox.To activate or dea
System Functionality 157© 2012 ATEÏSThe message window is divided in two sections, one for the message taken from the message library(left one) and o
DIVA system158© 2012 ATEÏSSelect the message by ticking the check box.Click the "Add to Preparing List" button.In the message library window
System Functionality 159© 2012 ATEÏSBy using the Import/Export buttons on the Message Library page, you are able to import and exportcomplete me
DIVA system16© 2012 ATEÏSFigure 6: Update windowNext step is to set the network option. Simply click F12 or menu "Tools->Options"
DIVA system160© 2012 ATEÏSNote: Each message have an individual level setting, so each message could have a different level.Keep in mind that the mess
System Functionality 161© 2012 ATEÏSAt the left of the window, you will find the button name. You can set an event for only one button, two orall.In t
DIVA system162© 2012 ATEÏSFor all the settings available, please refer to the following list:Type: Display the type of event you are creating or modi
System Functionality 163© 2012 ATEÏSNext Event: Here you can select the event to start after the current one is finishedStart Impulse: Ticking this
DIVA system164© 2012 ATEÏSFigAnnexe 1In this case, the measurement unit can only detect 0V (closed) or 4.4 V (opened). In order to have different stat
System Functionality 165© 2012 ATEÏS5.2.10 Use SchedulerTo access the Scheduler window, go on the menu View -> Scheduler. The window below should a
DIVA system166© 2012 ATEÏSTo add a scheduler task, click on the Add button in the scheduler window. Then the Scheduler Taskwindow will pops up.Genera
System Functionality 167© 2012 ATEÏSRange: here you can specify the date and time for the first occurrence of the scheduler task. Youwill also specify
DIVA system168© 2012 ATEÏS5.2.11 Use Logic InputsLogic inputs are a way to start any type of event with an external trigger. They are separated in t
System Functionality 169© 2012 ATEÏSmonitoring options.Evacuation Inputs: The nine evacuation inputs can be used as simple logical inputs as well asm
Quick Start 17© 2012 ATEÏSFigure 7: New System Figure 8: Network options page
DIVA system170© 2012 ATEÏSIn order to select an event's type, use the drop-down menu. Then click OK. After you have press OK,you will return to
System Functionality 171© 2012 ATEÏSthe contact is open in neutral position.Latch Mode: By ticking this option you will set the contact to be in latc
DIVA system172© 2012 ATEÏS5.2.11.3 External Fault InputsAs explained before, the External fault Inputs have been implemented in order to offer the pos
System Functionality 173© 2012 ATEÏSThe purpose of the Evac configuration is to use 2 different play message events (Evac and Alarm) and touse them wi
DIVA system174© 2012 ATEÏSType: Display the type of event you are creating.Name: Here you can specify a name for the event created. Default is Event
System Functionality 175© 2012 ATEÏSin two different manner. Static will close it until the event stop and Pulse will generate a closingpulse whose le
DIVA system176© 2012 ATEÏSInputs"Note: only eight of the nine DIVA evacuation input are accessible from the Evac Configurationoption. The ninth
System Functionality 177© 2012 ATEÏS5.2.13 Use Output RelayIn some event windows of DIVA software, you will have the possibility to set an action for
DIVA system178© 2012 ATEÏSThe busy relays have been made to inform user that there is already an higher priority event active in atleast on zone of th
System Functionality 179© 2012 ATEÏSTick the check box in order to enable the relay.Set the contact pulse length, range 50ms to 6000ms.Select on eac
DIVA system18© 2012 ATEÏSFigure 9: Device Search page Event Philosophy For a better understanding of how the DIVA works, a quick "Events" ex
DIVA system180© 2012 ATEÏSo Link by: By clicking the "a" icon, it will open a display in which you will find the CH X alreadyexisting trigg
System Functionality 181© 2012 ATEÏSThe monitoring window is then opened, see below.
DIVA system182© 2012 ATEÏSGeneral options:18K/20K Monitor Settingo Frequency (Hz): Here you can choose 18K or 20K.o Active Mode: There are two optio
System Functionality 183© 2012 ATEÏS1K monitoring will cause high pitch sounds.Leakage Detection Control: o M/S Amplifier Share: If there are more t
DIVA system184© 2012 ATEÏSo Press the "Get All Reference".o Choose a tolerance value for each zone. Note: References should be taken only on
System Functionality 185© 2012 ATEÏSmeasurement.Amplifier monitoring:The amplifier monitoring used a pilot tone at 18kHz or 20kHz that is adapted to p
DIVA system186© 2012 ATEÏSVO3: 530 OhmVoice: 545 OhmMusic: 540 OhmWhen music is routed to zone 1, the display shows 540 Ohm. As soon as a Voice call i
System Functionality 187© 2012 ATEÏSTo relate a setting to a preset, right click on the control and link it to a created preset in the list.The value
DIVA system188© 2012 ATEÏSTo modify a setting in the preset, load the preset, change the value and then save the preset withthe save button in the pre
System Functionality 189© 2012 ATEÏSIf you want to delete the Log Files, Press OK.You will be asked for validation: "SURE? OK/ESC".If Yes, P
Quick Start 19© 2012 ATEÏSFigure 10: Master page In the tree folder, click on audio. It will display all the audio sources available for DIVA. Simplyd
DIVA system190© 2012 ATEÏSTime: Displays the time at which the event happened.5.3 OperationCompileCompiling your current project will inform you in c
System Functionality 191© 2012 ATEÏSStore Status Area. If not already log in, DIVA software will ask you to enter a valid user name and password. Once
DIVA system192© 2012 ATEÏS5.4 User ManagementTo access the user management window, go on the menu User -> User Management.The picture above shows t
System Functionality 193© 2012 ATEÏSNote: by default, four user accounts are created corresponding to the four user level existing in DIVAapplication.
DIVA system194© 2012 ATEÏSSelect an Level for this user account, explanation on user level can be found here.Click Finish to finish the process.Click
System Functionality 195© 2012 ATEÏSprocess.Explanation on User LevelIn order to comply to the European standard EN 54-16, the user level have been se
DIVA system196© 2012 ATEÏSo click OK.o enter the next letter or number repeating the same procedureo Once you have enter the right user name, press on
System Functionality 197© 2012 ATEÏSIf you have created a Local Area Connection and want to modify it, right click the icon, highlightProperties.Note
DIVA system198© 2012 ATEÏSSelect "Use the following IP Address" and enter values for IP address, Subnet Mask, Gateway. Ifyou are not sure wh
System Functionality 199© 2012 ATEÏSUnder IP address, click the Add button.Enter the additional IP address and Subnet Mask.For more information abo
Revision History Time Version 2012/09/03 The First Version.1.0.0
DIVA system20© 2012 ATEÏSthe front panel. Click on Edit, for Music1 and Music2, in order to set event's parameters Define the priority from 0 to
DIVA system200© 2012 ATEÏSAfter all the network options have been set, please refer to the How To Set IP Address paragraph.Note: changing the UDP port
System Functionality 201© 2012 ATEÏSButtons explanation:Edit Search Group: Allows to define IP addresses group in which to perform the search process
DIVA system202© 2012 ATEÏSClick on the Add button, the Edit Search Group window appearsEnter a name for the groupEnter an IP addresses range, enter th
System Functionality 203© 2012 ATEÏSOnce an Ethernet PSS will be found, you will be able to use it in the configuration, see How to UseEthernet PS
DIVA system204© 2012 ATEÏSTo modify the IP settings of the device, please follow the next steps:Click on the corresponding device Modify button.It pro
System Functionality 205© 2012 ATEÏSIn this window you can enable DHCP by ticking the corresponding check boxEnter the IP address valueEnter the Subne
DIVA system206© 2012 ATEÏSClick the "Read" buttonThe "Compatible Version" displays shows the firmware version that will be working
System Functionality 207© 2012 ATEÏSTo activate this command, go the menu: Tools -> Update. The Update window will pop up:On this window, you will
DIVA system208© 2012 ATEÏS5.5.3.1 Update Master UnitOpen: Here you can specify the path of the MCU update file. By default, the path specified
System Functionality 209© 2012 ATEÏS5.5.3.2 Update Slave UnitOpen: Here you can specify the path of the MCU Slave update file. By default, the specif
Quick Start 21© 2012 ATEÏS Figure 13: Play Music Event windowConfigure your default source. Choice is between music source 1 and 2 (here 1). Your syst
DIVA system210© 2012 ATEÏS5.5.3.3 Update PSSG2Open: Here you can specify the path of the PSSG2 update file. By default, the path specifiedcorrespon
System Functionality 211© 2012 ATEÏS5.5.3.4 Update PSM/CD16Open: Here you can specify the path of the PSM/CD16 update file. By default, the specified
DIVA system212© 2012 ATEÏS5.5.3.5 Update PSSG2EOpen: Here you can specify the path of the PSSG2-E update file. By default, the path specifiedcorrespo
System Functionality 213© 2012 ATEÏSSquare Selector: You can select event(s) by ticking the square selector at their right.ID: The events created are
DIVA system214© 2012 ATEÏSThere are different types of event and here is a list of all events that can be created. Note: some event created by access
System Functionality 215© 2012 ATEÏSIn many event you will be able to choose some pre-defined zones. Here is the zone selector displayand explanation.
DIVA system216© 2012 ATEÏSAn action like closing a contact could induce to start an event. But as soon as the first event is finishedor stopped, the s
System Functionality 217© 2012 ATEÏSOnce you go back in the event window. You can see multiple information about sequences like the nextevent that is
DIVA system218© 2012 ATEÏSIn DIVA, you have the possibility to set preset. To learn more about presets, please read this.The event load preset can be
System Functionality 219© 2012 ATEÏSType: Displays the type of event that is created, in this case Load Preset.Name: Here you can specify a name for
DIVA system22© 2012 ATEÏS Figure 14: Message WindowClick on the "MSG Manager" button. A new "Message Library" window appears. In
DIVA system220© 2012 ATEÏSType: Displays the type of event that is created, in this case Load Preset.Name: Here you can specify a name for the event
System Functionality 221© 2012 ATEÏSType: Displays the type of event that is created, in this case Load Preset.Name: Here you can specify a name for
DIVA system222© 2012 ATEÏSName: Here you can specify a name for the event created.Priority: Here you can choose a priority level for this event.Attr
System Functionality 223© 2012 ATEÏSType: Display the type of event you are creating or modifying.Name: Here you can specify a name for the event cr
DIVA system224© 2012 ATEÏSAttrib.: Here you can specify if this event is a security one or not and if it is an evacuation eventor not. See Common Opt
System Functionality 225© 2012 ATEÏSType: Display the type of event you are creating or modifying.Name: Here you can specify a name for the event cr
DIVA system226© 2012 ATEÏSPriority: Here you can adjust the priority of the event. 20 is the lowest, 0 is the highest.Attrib.: Here you can specify
System Functionality 227© 2012 ATEÏSType: Display the type of event you are creating or modifying.Name: Here you can specify a name for the event cr
DIVA system228© 2012 ATEÏSPriority: Here you can adjust the priority of the event. 20 is the lowest, 0 is the highest.Attrib.: Here you can specify
System Functionality 229© 2012 ATEÏSType: Display the type of event you are creating or modifying.Name: Here you can specify a name for the event cr
Quick Start 23© 2012 ATEÏSFigure 15: Message Manager Library page Close the message page and go back on the "DIVA1" pageClick, under DIVA ic
DIVA system230© 2012 ATEÏSType: Display the type of event you are creating or modifying.Name: Here you can specify a name for the event created. Def
System Functionality 231© 2012 ATEÏSType: Display the type of event you are creating or modifying.Name: Here you can specify a name for the event cr
DIVA system232© 2012 ATEÏSMusic OFF By ZonesThe Music Off By Zones event allows to stop music source 1 or 2 with any type of trigger in pre-definedzon
System Functionality 233© 2012 ATEÏSTo learn more about output relay, please read the How To Use Output Relay.Music Source: Here you can choose the m
DIVA system234© 2012 ATEÏSMusic Source: Here you can choose the music source you want to switch on/offToggle Music ON/OFF By ZonesThe Toggle Music On
System Functionality 235© 2012 ATEÏSThe length of the pulse can be defined from 50 to 60000 ms.To learn more about output relay, please read the How T
DIVA system236© 2012 ATEÏSType: Display the type of event you are creating or modifying.Name: Here you can specify a name for the event created. Def
System Functionality 237© 2012 ATEÏSPriority: Here you can adjust the priority of the event. 20 is the lowest, 0 is the highestAttrib.: Here you can
DIVA system238© 2012 ATEÏSThe Music Source main window allows user to select in which mode the music sources are used. Youcan find:Modulation Detectio
System Functionality 239© 2012 ATEÏSPriority: Here you can adjust the priority of the event. 20 is the lowest, 0 is the highest. Note: becarful when
DIVA system24© 2012 ATEÏSFigure 16:"Front Panel Setup" windowIn dedicated area of "Play Message Event window (Figure 17), change the na
DIVA system240© 2012 ATEÏS5.7.1.1 Use Music Source From Front PanelOn DIVA front panel, you have the possibility to assigned music sources to a zone (
System Functionality 241© 2012 ATEÏSuse that way. Once the option selected, you will have access to detection settings:Threshold (dB): The threshold
DIVA system242© 2012 ATEÏSZone SelectionBy creating a "Zone Selection" key, you can make a selection of zones in which music will ber
System Functionality 243© 2012 ATEÏSMusic Source SelectionWhen creating a "Music Source Selection" key, you will have to choose between musi
DIVA system244© 2012 ATEÏS5.7.1.4 Use Music Source From Logic InputLike with the PSS, music sources routing can be operate by external trigger, that m
System Functionality 245© 2012 ATEÏSOn the left side, you will find the list of existing event. To create a new event, simply click on New underEvent.
DIVA system246© 2012 ATEÏSTo learn more about it, please read this.When logic input use event to control music sources, you can find a list of logi
System Functionality 247© 2012 ATEÏS5.7.2 MIC/LINE InputThe Mic/Line input can be used as a direct input for one external hand microphone and as an ad
DIVA system248© 2012 ATEÏSThe Mic/Line has three activation modes:Modulation DetectionThe modulation detection mode is like the VOX mode. It allows yo
System Functionality 249© 2012 ATEÏSType: Display the type of event you are creating or modifying.Name: Here you can specify a name for the event cr
Quick Start 25© 2012 ATEÏSFigure 17: "Message Event" edit pageFireman Microphone The Fireman microphone is a special monitored microp
DIVA system250© 2012 ATEÏSNext Event: Here you can select the event to start after the current on is finished.Start Impulse: Ticking this option all
System Functionality 251© 2012 ATEÏSAs opposed to the Attack time, the Release time is the amount of time for which the signal haveto stay under the t
DIVA system252© 2012 ATEÏSOn the left side, you will find the list of existing event. To create a new event, simply click on New underEvent. As soon a
System Functionality 253© 2012 ATEÏSWhen logic input have set for Mic/Line source, you can find a list of logic input associated to Mic/Linesource on
DIVA system254© 2012 ATEÏSVolume (dB): Indicates the current output level of the music sourceClip Threshold (dB): Allows to set the threshold point
System Functionality 255© 2012 ATEÏSAudio sources (Double Click the DIVA figure to enter in this window). Items in Audio Sources folder can only bedro
DIVA system256© 2012 ATEÏS5.8.1 Filter5.8.1.1 Hi/Lo PassOn DIVA, you can add hi-pass or low-pass filtering on audio input and on amplifier outputs in
System Functionality 257© 2012 ATEÏSOn InputsTo add high or low pass filter on audio input, drag and drop Hi/Lo Pass filter from the
DIVA system258© 2012 ATEÏSo Graphic: By clicking on the Graphic button, you will enter the filter graphic editionwindow, see below. By m
System Functionality 259© 2012 ATEÏSThe first PEQ filter can be changed to a High pass filter with the corresponding drop-down menu(see below).The las
DIVA system26© 2012 ATEÏSDouble click the Fireman Microphone Icon. The "Fireman Microphone" window will open(Figure 18). Figure 1
DIVA system260© 2012 ATEÏSFor the low pass and high pass filter, you have access to the following settings: cutoff frequencyand gain. By clicking on t
System Functionality 261© 2012 ATEÏSTo access the PEQ on inputs, go on the DSP configuration window.There is two ways to access the PEQs on amplifier
DIVA system262© 2012 ATEÏSAdjust the PEQ parameters to suit your needs.o Bandwidth (Oct): Here you can adjust the Q factor of the PEQ either by using
System Functionality 263© 2012 ATEÏSOn OutputsAdjust the PEQ parameters to suit your needs.o Bandwidth (Oct): Here you can adjust the Q factor of the
DIVA system264© 2012 ATEÏSentering directly the value in the dedicated cell.o PEQ Overflow Signal: Indicates if there is an overflow after the additi
System Functionality 265© 2012 ATEÏSDouble click on the compressor/limiter icon, the compressor/limiter window pops up, see below.Adjust the Compresso
DIVA system266© 2012 ATEÏSarrow key or by entering directly the value in the dedicated cell. Note: this parameter will haveno action if the filter typ
System Functionality 267© 2012 ATEÏSo Bypass: Clicking on the bypass button will instantaneously bypass the compressor-limiter.o Soft Knee: If the s
DIVA system268© 2012 ATEÏSo Gain reduction (dB): Indicates the current amount of gain reduction.o Graphic: By clicking on the graphic button, this
System Functionality 269© 2012 ATEÏSNo parity.Low-level Data ProtocolTransmission from Fire Panel to Voice Alarm Systemo Start character ”>” 0x3Eo
Quick Start 27© 2012 ATEÏSFigure 19: Paging Event window Then, under "Conflict", choose "Cancel All" "Coexist according to yo
DIVA system270© 2012 ATEÏSVirtual point commandFire Panel sends the following message if it wants to activate or deactivate an evacuation input onVoi
System Functionality 271© 2012 ATEÏSWith VN3 Evacuation Input 3 charactersSP ASCII Space 1 character (value 0x20)VS3 Status Code 3 charactersStatus Co
DIVA system272© 2012 ATEÏS5.9.1.3 Vox@netThis document describes Vox@net/MODAN protocol, used for remote control applications. Written by R. SeassauTh
System Functionality 273© 2012 ATEÏSFor example L25 means clear zones grouped on code 5 if they are occupied by channel 2,L41,3 means clear zones
DIVA system274© 2012 ATEÏSParity should be set to "No Parity".More information about the Notifier protocol and how to use it with
System Functionality 275© 2012 ATEÏS5.9.2.3 Vox@netHow to set the RS232 port of DIVA to communicate with a Vox@net server/client or in a remote access
DIVA system276© 2012 ATEÏSVox@Net/Modan explanation:The basics of those protocols communication is that DIVA receive audio stream along with RS-232com
Contact Infomation 277© 2012 ATEÏS6 Contact Infomationhttp://www.ateis.comATEÏS Europe BVATEÏS Suisse SAAddress:Sydneystraat 423047BP ROTTERDAM, NETHE
DIVA system28© 2012 ATEÏSChoose zone according to your needs. Then click "OK".In the Fireman Microphone window, select the behavior of
Quick Start 29© 2012 ATEÏSFigure 21: External Fault Inputs page EVAC: Evacuation inputs can be monitored input. It means that the line is
3Contents3© 2012 ATEÏSTable of Contents0Introduction 7...
DIVA system30© 2012 ATEÏSFigure 22:GPIO's Evacuation Inputs tabUnder Channel 1, tick the "Latch Mode" square selector. "L
Quick Start 31© 2012 ATEÏSFigure 23: Evacuation Inputs Event Selection page At the left of the page, you will see all the existing event. Select the
DIVA system32© 2012 ATEÏSFigure 24: Monitoring Window In the "Monitoring" window(Figure 24), you can see the machine display. It infor
Quick Start 33© 2012 ATEÏSTo add the scheduler for detecting the 1kHz monitor. Set the scheduler to trigger the detectfor every speakers' 1k tone
DIVA system34© 2012 ATEÏSFigure 25-2: Leakage detection control Window4 Product Features4.1 DIVA Series Audio Processor4.1.1 DIVA8M4.1.1.1 OverviewDIV
Product Features 35© 2012 ATEÏSThe DIVA8MG2 module unit houses : audio digital signal processing (DSP), a matrix, a digital messageplayer, a fully mon
DIVA system36© 2012 ATEÏSAs an EN 54-16 security system, all DIVA components and peripherals are constantly monitored(without music inter
Product Features 37© 2012 ATEÏSThis tutorial describes a PAVA system, VACIE, which is used for voice evacuation with anautomatic link to
DIVA system38© 2012 ATEÏS9x DIVA8S, for 9 x 8 zone paging1x DPAsingle1000, Paging amplifier1x DPAsingle1000, Music & Backup amplifier1x BECS150, P
Product Features 39© 2012 ATEÏSunique concept warrantees savings on rack assembly and amplifier power.The paging consoles, PSS-G2 and PSM8 are co
DIVA system4© 2012 ATEÏS...
DIVA system40© 2012 ATEÏS3x PSM-V2, paging console1x Vox-Net OUTPUT Node license4.1.1.2 What's inside the BoxOpening the box you should find the
Product Features 41© 2012 ATEÏSEN-54 Installation RequirementsIn order to comply with the EN-54 standard installation requirements, please c
DIVA system42© 2012 ATEÏS4.1.1.4 Front Panel Evacuation button: Initiates the evacuation process in manually selected or pre-defined zones. Power indi
Product Features 43© 2012 ATEÏSIntegrated monitoring speaker: The DIVA integrates a front panel monitoring speaker that canmonitor differe
DIVA system44© 2012 ATEÏSNote: The front panel connector and the back connector are parallel connected, please only use oneof them.4.1.1.5 Rear Panel
Product Features 45© 2012 ATEÏS Evacuation inputs:Evacuation inputs are contact inputs that allows the monitoring of external contact. They also can
DIVA system46© 2012 ATEÏS Music inputs:Cinch connectors to plug two different 0dB audio sources. External Fireman Mic Input:A replica of the front Fir
Product Features 47© 2012 ATEÏSTo learn more about how to perform a monitorable contact, please read this.4.1.1.5.3 C) RS232 Connector WiringThere a
DIVA system48© 2012 ATEÏSWith LAP as RS232 carrier:With VNB for Vox@Net application or as RS232 carrier:4.1.1.5.4 F) Control Outputs
Product Features 49© 2012 ATEÏSControl Outputs (Logic outputs) are simple contact that when closing link the OUTPUT connector to theCOM connector. Wir
5Contents5© 2012 ATEÏS...
DIVA system50© 2012 ATEÏSTo achieve this aim, simply connect the DIVA EXFLT connector to the amplifier’s FAULT connector.4.1.1.5.6 I) 100V Signal Lin
Product Features 51© 2012 ATEÏSTo learn more on how to do the connection between master and slave, please see (DIVA8S / Linking)4.1.1.5.7 J) Speaker
DIVA system52© 2012 ATEÏSPSMG2 MicrophoneIn order to achieve a PSM cascade, Junction boxes have to be used. The following schematicshows how to cascad
Product Features 53© 2012 ATEÏSWith external power supply due to distance limitation, the use of a junction box is required. TheJunction Box should be
DIVA system54© 2012 ATEÏS4.1.1.5.9 L) Ethernet (RJ45) ConnectorWiringPSSG2-E MicrophoneThe PSSG2-E can be connected to any TCP/IP port in a
Product Features 55© 2012 ATEÏS
DIVA system56© 2012 ATEÏS4.1.1.5.10 N) Mic/Line Input (XLR)WiringThe MIC/Line input can be used as a microphone input or as a third music input. Acco
Product Features 57© 2012 ATEÏS4.1.1.5.11 O) Music Inputs (RCA)Two pairs of RCA connectors for audio input.WiringConnecting music sources to DIVA is
DIVA system58© 2012 ATEÏSIn order to fulfill European standard, DIVA8 system should be connected to a battery charger and asecurity power supply (like
Product Features 59© 2012 ATEÏSScreen2" Color TFT panel.PowerItemVoltageCurrent ConsumptionCommentAC Input100V~240V1.2AFrequency:47Hz~63HzDC Out
DIVA system6© 2012 ATEÏS...
DIVA system60© 2012 ATEÏSItemConditionMin.Typ.Max.CommentInput Level20HZ ~ 22kHz--16dBuElectrically Non-BalancedOutput Level 20HZ ~ 22kHz--16dBuElectr
Product Features 61© 2012 ATEÏS4.1.1.9 LCD MenuThe menu display offers the possibility to access different controls and system information. When inidl
DIVA system62© 2012 ATEÏSEVENTS LIST:In this menu, all operation occurrences will be listed from the youngest to the oldest.SCHEDULER LIST:In this men
Product Features 63© 2012 ATEÏSo Fireman Levelo Mic Line Levelo Music 1 Levelo Music 2 Levelo Speaker Levelo System Timeo Mac Addresso IP Addresso Sub
DIVA system64© 2012 ATEÏS4.1.1.9.2 EVAC Zone ListIn the event of an evacuation state in the DIVA system, the Evac zone Info List will be automat
Product Features 65© 2012 ATEÏS User LoginThe Login menu allows to log into a user account to avoid entering it at each secured menu.From the SETTING
DIVA system66© 2012 ATEÏSo It displays "EXECUTE SUCCESS".If no, press ESC. Set LevelsThe following level you can set with Up/Down arrow butt
Product Features 67© 2012 ATEÏS Set Address & PortFrom the SETTING MENU:Use arrow keys to choose topicso MAC ADDRESS (User level 4 required)In the
DIVA system68© 2012 ATEÏSYou will be asked for validation "REBOOT VALIDATE". Note: after each change in theEthernet settings, the DIVA sys
Product Features 69© 2012 ATEÏSPress OK.You will be asked for validation: "SURE? OK/ESC".If yes, Press OK.o It costs few minutes on searchin
Introduction 7© 2012 ATEÏS1 Introduction1.1 WelcomeThank you for choosing ATEÏS DIVA. We here at ATEÏS hope you will enjoy our technology as much aswe
DIVA system70© 2012 ATEÏSo TFT RESET TIMERTo adjust the image position and colors of TFT screen in period. Press OK.Use + or - keys to set the time (N
Product Features 71© 2012 ATEÏS4.1.1.9.7 Managing Music SourcesOn DIVA front panel, you have the possibility to assigned music sources to a zone (or
DIVA system72© 2012 ATEÏSDepending on the software configuration created, there is two distinct way of starting a message:with manual zone selectio
Product Features 73© 2012 ATEÏSo The message is played in the pre-defined zone(s). Starting message with a manual zone(s) selectionPress the zone butt
DIVA system74© 2012 ATEÏSo Press OK.o DIVA displays "TEST ENABLE 2 SURE? OK/ESC".o Press OK.o The message is played in the pre-defined zone(
Product Features 75© 2012 ATEÏS Starting a call with manual zone(s) selectionPress the zone button(s) where you want the call to be played. The corres
DIVA system76© 2012 ATEÏSAs a part of the DIVA8 system, The DIVA8S Slave unit complies with current standards.DIVA8S is made of:8 loudspeaker zones ex
Product Features 77© 2012 ATEÏSFigure2: DIVA8M Master unit and DIVA8S Slave unit with 4 amplifier channelsOn both schematics, the 0dB lines are displa
DIVA system78© 2012 ATEÏS4.1.2.2 What's inside the BoxOpening the box you should find the following items:DIVA slave Unit Rack rounting brackets,
Product Features 79© 2012 ATEÏS4.1.2.4 Front Panel Power indicator LED:Indicates the power status of the DIVA. Voice alarm control and indicating equi
DIVA system8© 2012 ATEÏSHotelsRestaurantsShopping mallsTheme parksPlaces of worshipStadiaMuseumsIndustrialUniversity and campus applications
DIVA system80© 2012 ATEÏSConnectors to create a master-slave DIVA system. About wiring, see Overview. 24VDC input:24VDC power supply for battery opera
Product Features 81© 2012 ATEÏSItemConditionMin.Typ.Max.CommentInput Level50HZ ~ 18KHz-100V-Electrically BalancedOutput Level (0dB)50HZ ~ 18KHz95V100V
DIVA system82© 2012 ATEÏS4.2.1.1 CharacteristicsCaseDimension = 62mm (W) x 45mm (L) x 102mm (H).Weight = 0.15KGCable = 1.8M(spring cord)MicrophoneBand
Product Features 83© 2012 ATEÏSLevel (dB): when connected to DIVA, you can adjust, real time mode, the level of the firemanmicrophoneVolume (dB):
DIVA system84© 2012 ATEÏSThe Fireman Microphone Paging Event window (see above) is divided in several section where can set:Priority: you can specify
Product Features 85© 2012 ATEÏSNote: the security and evacuation options are automatically passed to the event accessible inthe Advance Setting The ne
DIVA system86© 2012 ATEÏSRS485 protocol over a single CAT5 cable connection, to transport both Audio and Power from the PSMto the system units. The PS
Product Features 87© 2012 ATEÏShigh quality directive signal pick up from the user and hence less interference from the surroundings. Hold LED:These L
DIVA system88© 2012 ATEÏSStatusPOWEREVACFAULTBUSYHOLDPress Event Select Key----ContinuousUsing selected zones---ContinuousContinuousStatusTALKPress ta
Product Features 89© 2012 ATEÏSThe PSM microphone can also be cascaded, and you can slave up to 10 PSMs.To access the PSM programming window, simply d
Introduction 9© 2012 ATEÏS1.3 EC Declaration of Conformity
DIVA system90© 2012 ATEÏSMode:o No Fault Report on PSM: If ticked, no DIVA fault status will be shown on the PSM faultLED.o No Fault If Missin
Product Features 91© 2012 ATEÏSfailure.o MIC: Virtual LED that will light up in case of microphone capsule issue.o MIC Out: Virtual LED that check t
DIVA system92© 2012 ATEÏSIn order to create a key, follow the next few steps:o With the drop-down menu corresponding to the key you want to set, selec
Product Features 93© 2012 ATEÏSWhen creating a music source selection key, you will have to specify the correspondingmusic source with the help of
DIVA system94© 2012 ATEÏS4.2.3 PSSG24.2.3.1 OverviewThe PSSG2, CD-TOUCH paging microphone console is a man-machine interface which allows pagingcall
Product Features 95© 2012 ATEÏS168 Touch fields: 14 pages with 12 keys , for PSSG2, PSSG2-E.16 Touch fields for PSSG2, PSSG2-E.Jack audio input/Output
DIVA system96© 2012 ATEÏS Right Button:Press and hold it for a while to calibrate touch screen. Monitoring Speaker:This embedded speaker to play chime
Product Features 97© 2012 ATEÏSTo access the PSS window simply double click on the PSS icon on the master page. In the PSSwindow, you will
DIVA system98© 2012 ATEÏSMode:o No Fault Report on PSS: If ticked, the PSS won't display faults of the DIVA system.o No Fault If Missing:
Product Features 99© 2012 ATEÏShave to tick this option.o Double Click: If ticked, to activate a PSS key you will need to press it twice.Chime select
Kommentare zu diesen Handbüchern